This 5-axis tube machining package is for intake and exhaust tubes for engines as well as pipe inlets and outlets for pumps and condensers. It is possible to continuously machine strongly undercut geometries in one operation on the basis of the simplest guide curves. As no special demands are made of the data model; trimming, closing of gaps and surface feedback can all be eradicated. This easy-to-use package allows the user to achieve quick results without time- consuming tests. The proven collision check and avoidance system ensures safe 5-axis milling operations.
With this strategy, the tube is milled in a continuous machining process from stock. This 5-axis simultaneous strategy is an effective alternative to machining with several axes in fixed positions. There is a spiral infeed to the bottom and work is executed on the plane. Stock removal can occur from the outside to the inside as well as from the inside to the outside.
With this strategy, the tube is finished with a spiral or parallel tool path. The spiral tool path creates a seamless, high-quality surface. With parallel machining, it is possible to avoid unnecessary movements of the rotary axes.
With this strategy, rest material areas are machined in either a spiral or parallel movement. The areas to be machined are described by a reference curve. The machining width can be limited by defining a value symmetrical to the reference curve.
Programmed by hyperMILL® – milled on DMG.
A manufacturing example for Automotive.
