Performance Boost for Turning

A partnership for unequaled performance: Together with Vandurit, OPEN MIND developed a CAM strategy that is perfectly aligned with the innovative rollfeed^® turning process. The use of these inserts with particularly large radii results in significant time savings.

Thanks to the new rollfeed^® turning-rolling inserts from Vandurit and the perfectly adapted hyperMILL^® rollfeed^® turning strategy, flawless workpiece contours can be achieved in no time at all. What makes this turning method so clever is how the tool’s cutting edge rolls off the workpiece surface, regardless of contour. The large radii on the insert, ranging from 17 to 19mm will allow a much higher feed rate and greater cutting speed than with conventional inserts and deliver a twist-free finished surface.

rollfeed^® indexable inserts

Sometimes less is more. Only two rollfeed^® indexable insert geometries are required for finishing. The T insert is suitable for machining up to three workpiece sides; the X insert allows for processing up to two workpiece sides.

Inserts | rollfeed Turning | MAXX Machining

comparison feedrate and surface quality | rollfeed | Finishing | MAXX Machining

Perfect surfaces despite high feed rates

The rollfeed^® indexable inserts achieve a significantly better surface quality than conventional inserts with a radius of only 0.4mm or 0.8mm, especially at high feed rates. The improved cutting conditions also extend the service life of the rollfeed^® tools by 300-500 percent.

Features

Highly efficient process
Generates perfect surfaces free of twists
Simple to program
Fewer tool changes
Undercuts can be integrated into rolling movement
Tool life extended by 300-500%

Areas of application

All materials can be machined
Use of any cutting material for turning inserts possible
Suitable for inside and outside machining
Diverse applications: for plane levels, cylinder, convex, and concave surfaces, as well as for inclinations and grooves