Webinar recordings

Did you miss a webinar or do you want to rework it?
No problem: Here you will find a list of all webinars.

Deep Cavity & Gun Drill Machining 

This workshop presents a collaboration of GROB Systems, OPEN MIND Technologies and EMUGE for the demonstration of deep cavity and gun drilling applications.

During this event, GROB’s 400mm pallet, horizontal 5-axis machining center, the G350, will demonstrate how difficult deep cavity and gun drilling applications can be made easily with GROB’s unique machine kinematics, OPEN MIND’s state-of-the-art CAM technology, and Emuge’s Circle Segment cutters and FPC milling holders for High-Performance Finishing.

Watch Now!

hyperMILL® MILL-TURN Machining:
Revolutionary Turning Techniques made easy. 

The most advanced 2.5D, 3D, 4- and 5-axis milling cycles in the market combined with turning, allows highly efficient operations with mill-turn centres. Move from programming via the control to release the benefits of trochoidal turning: In the 45-minute webinar, we will give you an insight into what our application engineers like most about hyperMILL® MILL-TURN and how these advanced techniques can benefit your business from reduced costs to higher productivity.

  • hyperMILL® MAXX Machining Turning - Following on from the success of our MAXX High Performance Roughing toolpaths in the milling environment, we will present our MAXX High Performance Turning with at 40%-time savings compared to normal roughing techniques. Huge savings are possible. This is a perfect start to your journey to MAXXimise performance.
  • Simultaneous turning programmed with ease - Two special strategies for simultaneous roughing and finishing make programming both simple and reliable. Optimal tool usage, longer tool life and less tooling are required.
  • rollFEED – Allowing a much higher feed rate and greater cutting speed than with conventional inserts and deliver a twist-free finished surface. For the ultimate performance within the production environment.

Domonic Prinsloo, Application Engineer

Watch Now!

IMTS spark - Hybrid Machining from a CAM Perspective 

Sponsored by Okuma
This additive Demo presentations will focus on hyperMILL® as a complete CAD/CAM system and highlight additive/subtractive processes with Okuma Laser EX technology. OPEN MIND will present how to easily overcome common challenges. The tools offered by the software - namely stock tracking, collision control, collision check, machine simulation with material build/removal - can support you in your daily tasks.

Watch Now!

hyperMILL® AUTOMATION Center Customer Solution

Do you anticipate a programming volume that you cannot handle with your CAD/CAM system and without automated processes?
Or do you need to increase the efficiency of your CAD/CAM programming in order to remain competitive in the future?

With turn-key automation solutions, OPEN MIND offers exactly the right tool to modernize programming processes and establish new, more profitable processes and technologies.

In this webinar, you will learn by means of a practical example how you too can implement a turnkey automation solution together with OPEN MIND.

Watch Now!

hyperMILL® AUTOMATION Center Advanced

Are you ready for the next step? Then you've come to the right place! With the hyperMILL® AUTOMATION Center Advanced, you can take advantage of all the benefits of OPEN MIND's automation technology. It allows you to make your own CAD/CAM processes much more efficient.
Regardless of your portfolio and whether you are dealing with holes, pockets or 3D geometries, or whether you use 5-axis strategies - with hyperMILL® AUTOMATION Center Advanced you can automate all machining strategies available to you in hyperMILL®. To create a successful automation solution, it takes a savvy hyperMILL® user who knows their processes inside out.

In this webinar, you will learn everything you need to know to successfully automate your manufacturing.

Watch Now!

Aerospace Component Machining Challenges 

Whether rotating or structural components, there are always problems associated with the machining of Aerospace parts. This 45 minute webinar will highlight some of these typical problems and how they can be overcome, using new and advanced CAM technologies.

Simon Docker, Sales Manager
Joshua Harper, Application Engineer

Watch Now!

hyperMILL® AUTOMATION Center Basic

Take the first step towards process automation! Have you ever wondered how you can optimize your machining workflow without sacrificing programming efficiency? Then our webinar is the right place for you! We will show you how you can automate your manufacturing process through standardization, even with the basic version of hyperMILL® AUTOMATION Center, at no additional cost. Standardization in the CAD/CAM environment means that your proven and already optimized manufacturing strategies can be reused throughout the company. This ensures that all CAD/CAM programmers achieve a consistently good result, there are no unnecessary sources of error.
In this webinar, you will learn how to standardize and automate simple processes so that they can be used for more complex processes in the future.

Start optimizing and standardizing your processes too and get the most out of your process time!

Watch Now!

hyperMILL® 2021.1 UK Update What’s New? 

You want to program more effectively and get the best out of your machine?
Then take the opportunity to further deepen your hyperMILL® know-how and get information about improvements to existing functions as well as completely new strategies. In this live webinar we will show you the highlights of the upcoming hyperMILL® and hyperCAD®-S 2021.1 version.

Justin Talboys-Cotton, Sales Manager
Dominic Prinsloo, Application Engineer

Watch now!

hyperMILL® MAXX Machining 

In this webinar we will be showing the latest and most innovative technologies in Tool and Mould Making. We will show how you can mill highly efficiently and reduce your production times.

Ken Baldwin, Sales Director
Josh Harper, Application Engineer

Watch now!

hyperMILL® 5AXIS Success Story 

Join us in this historical and forward looking webinar where you will learn how you can partner for future success.
They say that those do not learn from history are condemned to repeat their mistakes. If you don't want to have to change supplier every few years. If you want to be the leading supplier or remain in front competitively then listen to the 5-axis Story from OPEN MIND Technologies.

Adrian Smith Managing Director
Ken Baldwin Sales Director

Watch now!

hyperCAD®-S Electrode 

Join us in this technical webinar where you will learn new simple methods to automate the design of electrodes with hyperCAD®-S Electrode. The new electrode module largely automates the construction process in hyperCAD®-S. Seamless technology and component data transfers in hyperMILL® also ensure fast, reliable programming. The entire process is highly supported, so that programmers can carry it out with just a few clicks, without requiring any construction knowledge.

Matthew Coulson Sales Manager
Pete Haywood Application Engineer

Watch now!

hyperMILL® VIRTUAL Machining 

hyperMILL® VIRTUAL Machining Center is a perfect virtual representation of the machine reality based on real NC data, it provides networking between the machine and hyperMILL® to provide an unprecedented level of process control and optimisation. This is an important step to Smart Factory.
It will increase your confidence in running projects.

Matthew Coulson Sales Manager
Corey Jamieson Application Engineer

Watch now!

Manufacturing Solutions for Aerospace Engine Components 

hyperMILL® webinar in collaboration with EMUGE-FRANKEN

Impellers, IBR, Single Blades, Shafts and Engine Casing are major components of an Aero-engine and the most challenging parts to machine. A must attend webinar for aerospace manufacturing professionals dealing with machining of engine parts with complex geometries and exotic materials using advanced CAM system and cutting tools.

OPEN MIND Technologies will discuss about:

  • A real engine component (Impeller and Blisk) programming with advanced CAM technology
  • Unique offerings for Turbomachinery component manufacturing
  • Complete CAM solution for Aerospace Engine parts

EMUGE-FRANKEN will discuss about its advanced tooling solutions:

  • State-of-art technology solutions from FRANKEN end mills for exotic material machining
  • FRANKEN end mills innovations & advanced features offering value benefits
  • Aerospace success stories

Watch now!

hyperMILL® ADDITIVE Manufacturing

You are manufacturing or are interested to manufacture parts using a Direct-Energy-Deposition process? You are searching for an innovative solution capable to support you in the programing task?

Thanks to 25 years of experience to generate toolpath for high performance machine tools, hyperMILL® offers now an innovative Additive manufacturing solution capable in 2D, 3D and 5-axis. This webinar will show you how Additive Manufacturing can be applied for coating, repair, adding features to an existing part or to build from scratch.

Watch now!

hyperMILL® a CAM system that unleashes your creativity in CAM and increase productivity 

In this free live webinar, we present how hyperMILL® unleashes your creativity and increases your productivity.

The aim of the webinar is to provide a tutorial on the features of hyperMILL® that sets it apart from competitive CAM solutions

Watch now!

Tips and Tricks Getting the most out of your hyperMILL® | Part Two 

Following on from the highly successful Tips and Tricks webinar in May 2020 we have been asked to run a sequel webinar Tips and Tricks for CAD and Turning.

hyperCAD®-S Deformation allows the CAM user to deform any geometry according to particular specifications, whether it is curves, meshes or faces.
Parametric Modelling enables the user to not only model components directly but also based on modelling history and parametrics.

Shop Viewer can help with social distancing measures / communication, between the CAM programmer and the machine operator. Data that is relevant to manufacturing can be visualised, simulated and every machining operation can be checked in detail direct next to the machine.

hyperMILL® MAXX Machining Turning follows on from the success of our hyperMILL® MAXX Machining High Performance Roughing toolpaths in the milling environment, we present our hyperMILL® MAXX Machining High Performance Turning with at least 40%-time savings

Tool Path Splitting links tool path length, to tool life. Long tool paths might need the cutting tool to be changed due to wear. hyperMILL® can automate this manual process.

Watch now!

Manufacturing Solutions for Aerospace Structure Components 

hyperMILL® webinar in collaboration with Mitsubishi Materials - MMC Hardmetal India

Aerospace manufacturing is the most technically challenging and safety critical industry sector.

A must attend event for aerospace manufacturing professionals looking for latest techniques and technologies to machine complex part and boost productivity with advanced CAM system and cutting tools.

OPEN MIND Tchnologies will discuss about:

  • Increasing process reliability and reducing programming & machining time
  • Efficient machining of exotic aerospace grade materials (SS, Ti, Inconel & HSRA)
  • hyperMILL® solutions for Automation, Additive manufacturing & Industry 4.0

MMC Hardmetal India will discuss about its advanced tooling solutions:

  • Advanced technology for tools used in Aerospace components machining
  • Unique features of product and their advantages
  • Case Studies for Aero-structural parts

Watch now!

hyperMILL® AEROSPACE Solutions

Complex shapes, difficult-to-machine materials and higher quality expectations are some of the known challenges of Aerospace manufacturing.

hyperMILL® offers the most comprehensive and versatile solution for manufacturing of High-mix Low-volume production for aero-engines and aero-structures.

Join us for this webinar and learn how to leverage your machine-shop assets alongside hyperMILL solutions, for increased productivity and competitiveness.

Watch now!

hyperMILL® 3 Axis Milling - Improve Quality and Cycle Time 

In the crowded 3 axis market, businesses are striving to show differentials to win new business.

For many years now hyperMILL® has been regarded as the most powerful CAM solution for 5-axis machining, but this is your chance to see how hyperMILL® can equal this performance in 3-axis machining also.

During this webinar we will be demonstrating many advanced 3-axis features to reduce your cycle times, increase your efficiency and produce superior quality parts. These features include:

  • Stock Management and Auto Trim to Stock to reduce machine air moves.
  • Smooth overlap blending between toolpaths to massively reduce tool witness marks.
  • Intelligent and automatic lead in and lead out moves.
  • Optimised roughing strategies for different materials and applications
  • Automatic surface extension option to give the user full tool engagement control.
  • High-Precision machining to produce superior quality surface finish.
  • Fast cycle time calculations.

Watch now!

hyperMILL® AUTOMATION Center - Knowledge based Programming 

Automate your programming processes today! Find out in the webinar how you can create and use your own automation solution with the hyperMILL® AUTOMATION Center. This will simplify your CAM programming and get you to the NC program faster.

By automating the simpler parts of your program, this leaves you free to concentrate on the value added more difficult parts of the work. Automation also allows senior engineers to embed their experience in the program sections for more junior engineers to use. Automating will improve your productivity and make you more competitive.

Watch now!

hyperMILL® 2020.2 | UK Update: What’s New? 

hyperMILL® 2020.2 offers numerous new functions that will simplify and speed up your daily tasks. The inclusion of hyperCAD®-S Parametric represents yet another one of our milestones. With this, components can be modelled para-metrically. Thanks to extensions for turning and for additive manufacturing, users can now deploy these technologies even more efficiently and reliably.

Watch now!

hyperMILL® for Medical Industry 

Medical sector is a rapidly growing industry manufacturing a wide range of surgical instruments and orthopaedic implants.
This webinar is in collaboration with GF Machining Solutions, OPEN MIND will address challenges like:

  • Reducing setup time for machining organic shapes - Knee/hip joints
  • Improving quality & finish of bone plates, hip joints
  • Using special tools for implant and trauma parts
  • Efficient machining of tough/hard materials (Ti, CoCr, Inox Steel)

GF will discuss about its machines for:

  • Global technology, local solutions
  • Productivity and flexibility
  • No compromise on quality without any productivity loss
  • Unique features for competitive advantage

A must attend event for medical equipment manufacturing professionals striving for higher quality products with shorter production times.

Watch now!

hyperMILL® MILL-TURN Machining 

Mill/turn centres are designed for efficient all-in-one machining in a single setup. With its MILL-TURN Machining module, hyperMILL® CAM software provides the perfect integration of milling and turning strategies in a single user interface.

  • Save time in programming
  • Reduce cycle time
  • Improve quality

Watch now!

Tips and Tricks Getting the most out of your hyperMILL® 

In this free webinar, we will be giving a tutorial in some of the cycles we feel are under used, but can give some of the highest returns. Five Axis Rework simplifies turning a 3-axis design into a 5-axis design: It shows how to get to hard to reach points and validation of collision avoidance.
Barrel Machining, ever wondered how much you can save? We will introduce a spreadsheet you can use to calculate the tool radius and step down and hence the savings, as well as how to use all the faces on the mill to reduce tool wear.

Watch now!

What's New: hyperMILL® and hyperCAD®-S 2020.1 

hyperMILL® 2020.1 offers many innovations in all areas. General improvements in the new version increase usability and the performance of programming.

In this free live webinar we present to you the highlights of the hyperMILL® and hyperCAD®-S release 2020.1. Eric Chua & Jerry Goh of OPEN MIND will show you new strategies as well as improvements in already existing functions. The highlights of hyperMILL® and hyperCAD®-S 2020.1 will be presented during this webinar as well as Q&A session with attendees.

Watch now!

High Precision Machining 

In this webinar we will show you how you can optimise your finishing operations with High-Precision Machining. The results are high quality surfaces and flawless transitions between the different milling areas.

Watch now!

hyperMILL® for Die and Mold 

We will showcase our advanced CAM features of hyperMILL® which helps you to do effective programming for Die & Mold challenging/complex parts.

Watch now!