Efficient programming with hyperMILL®

Typical 2.5D drilling and milling tasks can be programmed efficiently using hyperMILL® CAM software.

hyperMILL® 2.5D machining is typically applied to plate processing in tool and mold manufacturing. Pocket machining, plane levels, contours and drill holes present very unique challenges here. Intelligent me­cha­nisms, such as the recognition of pocket features can now help the CAM user to program faster than ever before.
With its high-performance cutting functions (HPC), hyperMILL® MAXX Machining will boost machining per­for­mance during 2.5D roughing.

Accelerated 2.5D programming

2D components normally offer great potential for process automation. hyperMILL® therefore provides a new and comprehensive solution that allows programming to be completely automated. All 2.5D strategies can also be applied to multi-axis machining.

Videos: 2.5D CAM strategies

Want to watch our videos?

Then please enable cookies to view this content.

Enable cookies

hyperMILL® 2.5D-Strategies: T-Slot Milling on 3D Model
hyperMILL® 2.5D-Strategies: Chamfer Milling on 3D Model
hyperMILL® 2.5D-Strategies: Playback Milling
hyperMILL® 2.5D-Strategies: T-Slot Milling on 3D Model

Did you know that also T-slots can be programmed quickly and comfortably with hyperMILL®‘s feature technology? Feature-based machining speeds up and simplifies NC programming by using automated programming sequences.

hyperMILL® 2.5D-Strategies: Chamfer Milling on 3D Model

Did you know how fast and easy the deburring and chamfering can be programmed with hyperMILL®? With “2D chamfer milling on 3D model”, component edges with and without modelled chamfers can be deburred safely, in just a few clicks.

hyperMILL® 2.5D-Strategies: Playback Milling

Did you know the playback milling strategy and the playback function can be used for 2.5D machining? With these you can create toolpaths and boundaries interactively.

 

Would you like to learn more about our complete CAM solution for 2.5D Milling?

If so, please contact OPEN MIND Technologies USA, Inc.
1492 Highland Avenue, Unit 3, Needham MA 02492

Milling: 2.5D strategies

  • Pocket Milling
  • Rectangular Pocket
  • Inclined Pocketing
  • Contour Milling
  • Contour Milling on 3D models
  • Inclined Contouring
  • Chamfer Milling on 3D models
  • Rest Machining
  • Face Milling
  • Playback Milling
  • Plunge Milling
  • Multi-axis indexing with fixed tool angle

Drilling: 2.5D strategies

  • Centring
  • Simple Drilling
  • Drilling with chip break
  • Drilling with pecking cycle
  • Reaming
  • Tapping
  • Thread Milling
  • Boring
  • Helical Drilling
  • Drilling circular pockets
  • Gun Drilling

2.5D milling strategies

Discover a selection of our 2.5D milling strategies in detail

Pocket Milling

Pocket Milling is suitable for the machining of straight and inclined pockets with any contour. This includes the automatic recognition of islands and rest material areas. Open and closed pockets can also be machined without any issues when using the ‘Pocket Milling’ strategy.

feature recognition | 2.5d pocket milling –

Automatic feature recognition

control cycles | 2.5d pocket milling –

Supports 2D control cycles

hpc | 2.5d pocket milling –

2D HPC machining

Contour Milling

Contour Milling optimizes the machining of open and closed contours with the option of path compensation, automatic rest material detection and the machining of undercut contours that can be difficult to access. The ‘Contour Milling on 3D Model’ strategy also includes:

  • Collision check for the 3D model
  • Automatic contour optimization and sorting
  • Trimming of toolpaths to stock or model
  • Automatic approach and retract strategies
Rest Machining

During 2.5D contour and pocket machining, some areas cannot be machined with larger tools. The rest material strategy detects these component features and calculates separate tool­paths that can be machined with smaller tools.

Plunge Milling

The 2D curve-based 'Plunge Milling' cycle provides efficient roughing and finishing of vertical contours, even on difficult to cut materials.

Multi-axis indexing

All 2.5D machining strategies can also be app­lied to multi-axis indexing with a fixed tool angle. During this process, the orientation of machining is defined using a frame. Simple frame definition and management assist the user in programming operations with tilted fourth and fifth axes. With transformations in the NC programs, users can easily and conveniently create programs for multiple components clamped within a single plane or in a tomb­stone fixture, for instance. All traverse movements are checked for collisions and path-optimized.

Benefits of 2.5D milling strategies

  • Collision-checked with precise tool­paths
  • Detailed simulation
  • Optimal approach and retract strategies for all cycles
  • Simple and fast programming with feature and macro technology
mobile-s mobile-m mobile-l tablet desktop-s desktop-m desktop-l desktop-xl